Description
Description
A product designed to give you peace of mind once and for all from the problems of rain . If applied properly, the product will give you peace of mind for at least 10+ years.
It is a long-lasting, brushable roof sealant with the following characteristics:
- Resistance to standing water
-
Frost resistance down to -30 degrees
- Excellent elasticity over 300%
- Consumption: 1 kg/ sq.m for two coats
- Lifespan: 10+ years
-
Can be applied to slabs, cement, mosaic, old insulation, etc.
- Recommended Primer: Ktisepox Hydro PR
- The product is polyurethane-based, produced in Greece with German raw materials.
- The material is two-component and the two components must be mixed with an electric mixer before application.
-
Dilution with solvent by 5-10% is also recommended
If you want a more economical solution (that offers fewer years of protection) then we recommend you get Ktisotop
To see the differences between acrylic and polyurethane materials , click here
Application Instructions
ANYDRON 2K is used for the waterproofing of terraces and roofs. It can be used on a range of surfaces such as concrete, cement mortar, polyurethane foam, bridges, planters, etc.
SURFACE PREPARATION
Thorough surface preparation is essential to ensure good adhesion. The surface must be dry and free of dust, loose materials, mold. Oils and chemicals should be cleaned with a special detergent. If you have washed the surface, make sure it is thoroughly dry before application. If applying on fresh concrete, make sure that 28 days have passed before application.
It is recommended to prime the surface in order to ensure better adhesion. Epoxy primerKTISEPOX HYDRO PR is recommended. After applying the primer, wait one day before applying ANYDRON 2K.
Applying ANYDRON 2K
The contents of container B must be emptied into container A. The material must be mixed with an electrical stirrer and must last for at least 2-3 minutes at 300 rpm. Poor mixing is often the reason why the material does not harden properly, and remains soft and sticky after application. It is recommended to dilute the material with polyurethane solvent up to 5-10%.
The product can be applied either by brush or roller in two coats . The estimated consumption is 500-600 gr/m2 per coat depending on the absorbency of the surface. The second coat can be applied after 24 hours.
Allow a total of 3 consecutive days to complete the application. If it rains in the meantime, you can continue after the surface has dried.
Consumption
Expect to consume at least 1 kg per sqm for a properly waterproofed surface
