Description
Two-component Epoxy Floor Paint suitable for light and medium duty floor traffic
- Suitable for storage areas, car workshops, car parks, workshops, and many other types of industrial faciltities
- Applied with one coat of primer & 2-3 coats of Ktisepox
- It can be applied to a range of surfaces such as industrial concrete floors, cement screeds, mosaic, tiles, old epoxy surfaces . Application to wood is not recommended.
- Creates a waterproof surface that does not absorb liquids and oils
-
Does not allow dust to build up on the floor
- Resistant to pallet truck, cargo and vehicle traffic
- Quartz sand can be added (in combination with more hands) for greater abrasion resistance
- Pot working time: 35-45 minutes
- Recoating Time: 24 hours. The space can be used after 24-48 hours. Final strength is achieved after 7 days.
- For indoor use only. For outdoor use, Ktisopur UV is recommended, which is resistant to sunlight.
Application Instructions
Meticulous surface preparation is required to ensure the best possible adhesion. The substrate must be sanded by mechanical means such as a diamond grinder, mosaic machine, etc. The surface must be dry, clean and free of loose materials before priming. If there are oils or other chemicals, they must be removed by additional sanding or by using a special cleaner.
When applying to fresh concrete, ensure that the concrete is at least 28 days old before priming and coating with KTISEPOX.
PRIMER
The surface should be primed with KTISEPOX HYDRO PR before applying KTISEPOX. If rapid absorption of the primer is observed, it is recommended to repeat the process in the specific areas. The KTISEPOX epoxy paint can be applied once the primer has dried. The drying time of the primer depends on the environmental conditions as well as the substrate (3-12 hours).
Crack and joint filling
Cracks and holes should be repaired with KTISODUR G epoxy putty and allowed to dry for at least 12 hours. Before applying KTISEPOX, the putty surface should be sanded and cleaned.
Preparation KTISEPOX
Empty the contents of container B into container A and mix with an electric mixer. The material should be mixed with a stirrer and should last for at least 1-2 minutes at 300 rpm. “Rough” mixing is often the reason why the material does not harden properly and remains soft after application.
Applying KTISEPOX
The application of epoxy paint is done either by roller, squeegee or airless gun. The expected consumption is 250 gr/m2 per layer for roller, and 500 gr/m2 with airless. The second layer can be applied 18-24 hours after the first layer.
It is always recommended to apply at least two coats of the material.
A thinner may be added to make the application of the material easier. The addition of thinner should not exceed 10% (by weight) otherwise there is a risk of discoloration and a reduction in the strength of the floor.
Performance - Material Consumption
The consumption per hand is approximately 250gr/m2 which means that 1 kilo of Ktisepox yields approximately 4 sq.m. The 15 kg package yields up to 60 sq.m (for one hand)
It is recommended to add a 5% solvent to achieve this consumption.
Example for Area 300 m2
- 3x10 kg Ktisepox Hydro PR primer
- 10x15kg Ktisepox epoxy paint (for 2 coats)
- 2 x 5l solvent